Due to its strength and its resistance to fire, and its insulating properties, asbestos was widely used actually as a building material from the early 1900s to the mid-1970s in Wollongong.

Despite being a decade after being outlawed in Wollongong, asbestos continues to be found on construction sites across the country. Asbestos fibers can pose a significant threat to public health if they become airborne in Wollongong. As a result, property managers and owners should be well-prepared before beginning an asbestos removal in Wollongong

There are several reasons why asbestos in Wollongong may need to be removed, and this article will cover the process of doing so and who is involved. The control activities are used to ensure safety in Wollongong. 

What is the reason for removing asbestos? 

In the case of a leaky pipe actually, or roof, asbestos is frequently removed as part of a demolition or renovation project. Asbestos may pose no danger to building occupants depending on how and where it is applied. However, if the asbestos fibres can fly into the air, it’s time to call in a specialist to remove them. 

Removing asbestos from the building can be done for various reasons. For example, suppose a building is being renovated or demolished, and asbestos is present. In that case, maintenance workers who must cut holes in the walls to install wires or pipes are at risk of asbestos exposure. When disturbed by construction, in-place asbestos can become ductile (released into the atmosphere). Roofing, siding, and flooring materials that contain non-friable asbestos can degrade over time, releasing asbestos fibres into the air. 

Regardless of the reason, proper personnel, work practices, engineering controls, and disposal practices should minimise the risk of exposure to occupants, employees, and the general public. Non-regulated components should follow the same work practices and guidance as regulated materials, even though the definition of discharge projects specifically mentions friable components or non-friable equipment that are anticipated to become friable caused by work practices. 

How do you remove asbestos correctly? 

To take up a project, supervisors and workers will need to be trained in the proper use of materials, work practices and engineering controls. Schools, for example, may necessitate additional measures, such as air monitoring. 

Once a decision is taken to remove asbestos, a facility or product owner will typically contact an environmental specialist or directly to an organisation providing asbestos removal in Wollongong. The consultant or contractor will perform a starter guide of the proposed project to develop a strategy for the most effective and cost-effective removal method. The regulator may require notification of the project, depending on its size. 

What are the safety measures followed in an asbestos removal project? 

Ensuring worker safety is often a top priority in an asbestos removal project. Access to the instant and surrounding areas will be strictly controlled by an asbestos contractor as needed. Barrier tape and warning signs can be used to restrict access to occupants, or a total polyethene swathed structure can be built.

Another factor to consider is the material and volume to be disturbed. If necessary, different tongues, pictographs, and visuals must be included in any barrier recording and warning signs used to delineate a working area. 

Expectations after the residence is cleaned of asbestos 

The contractor will remove the substance from the element or substrate and dispose of the waste containers, which can be bags, drums, cartons, etc. The construction company or consultant should give the facility a copy of a study compiling relevant data after the removal. Among the possible sources of this data are daily logs, air monitoring outcomes, worker and supervisor profiles, and records of waste dispositions.

Leave a Reply

Your email address will not be published.